-18%
New

Digiprog3 Full set OBD Version Normal/FTDI EU/ES plug Original CPU FTD

Digiprog3 Full set OBD Version Normal/FTDI EU/ES plug Original CPU FTDI CHP Digiprog 3 V4.94 DigiprogIII Mileage Tool

Digiprog3 OBD Version With OBD Cable ST01 ST04 Multi-Language Digiprog iii

1. This is for Digiprog III with OBD2 cable, not whole set ,it does not included cable full set.

2.It has Normal version and FTDI FT232BL&93C46 Chip version,please choose the one you need .

3. US Plug and EU Plug Optional.

The difference between the normal version and the FTDI version

There are 2 chips in the FTDI version of the mainframe. FTDI FT232BL and 93C46 chips

The following is a comparison of our correct operation and incorrect operation. You can see that if you click lightly and randomly, the button will not be available. If you follow our instructions, use a little pressure or click with a pen, the buttons will work normally.

DIGI3 Operation test video:

https://mega.nz/file/PaphjKLB#bm-KAHZnyCF35SaaaVCFxSji2JEwWl5g3NFIinXtr2Q

Top 4 Reasons to Get This Main Unit of V4.94 Digiprog3:

1. Latest software Version: V4.94

2. Supported Multi-Languages: Deutsch, English, Espanol, French, Portuguese, Italiano,Turkish, Nederlands.

3. There are only main unit and obd2, st01 and st04cable inside the package,lighter and easier to pass custom house.

4. Cheapest price

The password is "1".,then click √.

(Please DO NOT change the password by yourself,Otherwise the device can not used and locked. Out of warranty.)

Digiprog 3 How to use ？

1.Turn off your engine and locate the "Function" button on the front of DigiProg III Mileage tool

2.Press and hold the "Function" button while turning the engine on. DigiProg III Mileage tool will now enter calibration mode.

3.Press the "Function" button repeatedly to scroll through the options until you come to "Auto."

4.Press and hold the switch until "-" is displayed. Release the switch when this appears. "Unit" will now appear on the display.

5.Wait until "Cal" appears on the display followed by zeroes, then drive your automobile until one mile clicks over on DigiProg III Mileage tool

6.Stop the car and then press and release the "Function" button. The mileage is now set.

Important Tips for Using Digiprog 3:

1. DO connect the Eeprom to the ST01 or ST04 before you connect to Digiprog3, which will avoid Electro static feedback (ESD).

2. Never solder the connections whilst the lead is connected to the programmer, which will damage DigiProg3.

3. DO keep your DigiProg3 in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely, as the solvent will damage the clips.

Digiprog 3 Menu:

1. EEPROM Menu

The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.

2. CAR/TRUCK Menu

This is the menu you will use for Changevehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.

3. Motorcycle Menu

This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.

4. Special Functions Menu

The special functions menu is for use only by official DigiProg dealers.

Using the EEPROM Menu:

On some of the vehicles you will come across, an 8pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur ,you can always return to the point you started.

The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg3 by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.

Supported Model List:

V4.94 Add Model List:

For Audi:

-A3 new version

For Ford :

-F150 24C16

-Falcon 24c02

For Mercedes:

-W176 new version

-W204 new version Diag

-W212 new version Diag

For Opel:

-Insignia new version

-Astra new version

V4.93 Digiprog 3 Programmer:

For Audi:

A3 Diag new version

A6 Diag new version

A8 Diag new version

For Mercedes:

R 172 Diag new version

R 231 Diag new version

W 212 Diag new version

For Ford:

Kuga Transit

For VW:

Amarok Polo Johnson

Please Note:

It can supports car models from 2005~2011mostly,but it does not means it supports all cars during those year.Car List is just for reference ,need to check with each car on real operation .

Some car have protection itself,maybe it can not supports .

It can not supports for VW golf very well.

Q: Does digiprog3 work with for VW golf 6 2009, golf 5 2006 and Peugeot 407 2006?

A: Yes. Digiprog 3 does. Please refer to digiprog3 vehicle list

Q: Does Digiprog III mileage for BMW after 2008year? Does Digiprog3 make key for BMW?

A: better use Digimaster 3 to program mileage for the high-end for BMW. Digiprog3 can't make key for BMW, advice you use AK300 key pro.

Q: what is Digiprog III power-on password?

A: Digiprog 3 Power-on password is 1. After enter password "1",click tick" √"not " X", otherwise Digiprog3 will freeze.

Q: What is the difference between tacho pro 2008 and digiprog 3?

A: tacho pro 2008 and digiprog 3 share the same function. But tacho pro works with the car before 2006 year, digiprog 3 works with the car even up to 2012 year.

Q:What is ST01, ST04 cable used for in the package of Digiprog 3?

A: It needs to remove chip when you program mileage for some car models. One end of the ST01 cable and ST04 cable clip the chip, and the other end connect to digiprog3.

Q: I use digiprog3 to work with Opel Astra 2004, and the manual suggests use No.1 cable, this cable is ST01?

A: Yes, No.1 cable is ST01 cable, and the software needs to open off-line programming or online-programming.

Digiprog3 OBD Version(OBD FTDI) Packing List:

1 x Main unit of Digiprog III

1 x OBD2 cable

1 x ST01 (01/2)cable

1 x ST04 (04/2)cable

1 x (01/4)adapte

1 x Power adapter

1 x CD Driver

Digiprog3 Full Set (Full Set FTDI)Packing List:

1pc x Digiprog III Main Unit