SBB is a general key programmer because it can program car keys of multiple brands because of its program and complete database, including the most important car manufacturing. Compared with previous versions supporting General Motors, V33, a key programmer of SBB, supports new vehicles, such as Ford 2010 and Hummer

SBB V33 keyboard making function
1. Program a new switch
2. Anti movement memory read key / pin code
3. Restart the key that is no longer in the owner's hand
4. Run through targeted menu programming
5. New remote control programming.

How does the master key manufacturer SBB work
Steps for SBB to make car keys:
1) Before running the SBB key programming program, insert a new empty key into the vehicle key hole.
2) Start the ignition switch;
3) Insert the SBB 16 pin connector into your OBD2 diagnostic seat. The SBB key programmer copies the chip according to the vehicle model, and its program key does not copy the key. Just insert the SBB 16 pin interface into your vehicle OBD2 diagnostic seat, and then read the pin code to prevent the internal discharge / EEPROM from moving, and then remove it from the vehicle. Write it down with a new empty key. When programming an f-ord vehicle, a pin code is not required.

SBB is the best AV in Europe, not Ramsey system.
SBB copies the chip according to the vehicle model, while AD900 copies the chip according to the vehicle model. The SBB key programming tool can make the key continue to work even if all keys are lost, because the SBB interface is inserted into the diagnosis seat to read the chip data; AD900 chip can write the old key into the new key or empty key. SBB can read the movement of pin code block like MVP and T300, while AD900 cannot read the movement of pin code block, AD900 cannot read the movement of pin code block, and AD900 can copy it directlyDuplicate key.

Six reasons for being smart

2. No password required!
3. New: support 8C and 8e function differentiation chip
4. Zed bull will meet all your requirements as a professional motion prevention system.
5. Zed bull is a responsive cloning device, including all zed QX functions and more additional functions.
6. Zed bull can now read Hyundai and Kia PIN codes!

Note: cannot update

Comparing zed-bll intelligence with zed-bll Intelligence: zed-bll intelligence can obtain 30% reading and writing speed. The success rate of zed-bll intelligent chip is increased to 99.99%, eliminating the waste of chip. (as we all know, some chips can only be written once)

The main features of smart zed bull are:

1. Find the pin code, write the pre sender, and realize the pre sender through EEPROM and MCU programming.
Zed bull computer software is an excellent feature that will help you use EEPROM applications. Image of ECU, where ECU has MCU or EEPROM, and the location of MCU or EEPROM is on the aircraft, which will use the transponder type... This information will reduce your workload. Using the function of automatic search module (AMF), the module will automatically identify when selecting EEPROM files.
Another revolution of zed bull is to program the responder without ECU key. Currently, zed-bll has 55 different applications, and more and more... Using this function, you can program the transmitter, find the pin code, and prepare the pre transmitter for vehicles that need pre transmitter, such as Fiat Doblo 48. For this function, you don't need an expensive pre treatment barber shooter, which costs about 8-10 euros. You can use an empty transponder.

2. Copy transponder:
11. 12, 13, 33, 73, 4C (enter 4C electronic key and lower battery tpx1 transponder), password fluctuation 40 (part), 41 (all), 42 (all), 44 (all locked), 45 (all)
So far, ordinary transponder replication tools can only replicate fixed transponder transmitters. But our revolution started with zed QX and grew with zed Paul. 41, 42, 44 (locked) and 45 (bijo) transmitters, commonly referred to as unable to replicate, can be replicated with zed Paul.

3. Make OBD transponder
If you have an OBD like T-code pro, you need a special pre transmitter for some vehicles. Instead of buying these special transmitters for a high price, you can use zed Paul to produce and use empty transmitters. You don't need an expensive pre treatment hairdresser, about 8-10 euros... Information you can make: 40, 41, 42, 44,45, 73, 61, 62, 65, 46 Volkswagen, Chrysler, Renault... At present, zedepaul has 24 applications to produce different transponders.

4. Hitag2 transponder programmer
If you want to buy an independent hitag2 programmer, you must pay about 1000-1500 euros. But when you have zed Paul, you will get this function of hitag2 programmer for free. You can work on hitag2 transceiver and improve yourself at work.

5. Easy to use wide graphic LCD.
A large screen Zedd bull will show more Zed-bull is a large screen. You can see more information, such as VIN number, details, 46 and 48 transponders... wait

6. Additional posts:
1) Read the kilometers, vins and key information of the original key and write it into the original remote key.
2) Find the pin from Hyundai and Kia's VIN numbers
(3) The PC program includes a broadband transponder directory, Fob main program and more information.
4) Rino 33 and pin transponder 45
5 open 48 (Magic II) lock transponder and make it reusable
6) Provide transponder information in the database, including encrypted transmitter
(7) 3 alternatives (red, black and white) for different equipment status colors.

List of smart Zeid bull bags:

1X zedepaul main unit
1X computer USB cable
1X power adapter
1x CD