How to choose vlinker BM you need?

Vgate Vlinker BM+ Bluetooth 4.0 for Android phone & for iphone

Vgate Vlinker BM+ Bluetooth 3.0 for Android Phone only

Vgate vLinker BM+ Supported for BMW models:

For BMW 1 Series F20 F21
For BMW 2 Series F22 F23 F87
For BMW 2 Series Active Tourer F45
For BMW 2 Series Gran Tourer F46
For BMW 3 Series F30 F31 F34 F35 F80
For BMW 4 Series F32 F33 F36 F82 F83
For BMW 5 Series FO7 F10 F11 F18 F90
For BMW 5 Series G30 G31
For BMW 6 Series F06 F12 F13
For BMW Series F01 F02 F03 F04
For BMW 7 Series G11
For BMW X1 F48
For BMW X2 F39
For BMW X3 F25
For BMW X3 GO1
For BMW X4 F26
For BMW X5 F15 F85
For BMW X6 F16 F86
For BMW i3
For BMW i8
For Mini F54 F55 F56 F57 F60

100% Original Adapter compatible with 95 % + World Car Models

1. Professional ELM327 is perfectly compatible with BimmerCode / BimmerLink.
2. Support Almost All ELM327 / ELM329 / OBDLINK Adapter Software
3. Support for BMW adjustment and programming
4. OBD2 Standard Protocols + More protocols
5. Fully automatic operation
6. Automatic sleep / start

Vgate vLinker BM+ Perfectly compatible with Bimmercode/ Bimmerlink for BMW Professional diagnosis/ activation/ adjustment Scanner

1. Read/ Clear DTC
2. Engine RPM
3. Module Reset
4. Module Activation
5. Remote Control
6. Regeneration
7. Automatic sleep/ start
8. Battery Tester

Vgate vLinker BM+ is an adapter that is perfectly compatible with BimmerCode:

Compatible with BimmerCode, BimmerLink, TORQUE Lite/ Pro, OBD Fusion, DashCommand, Car Scanner ELM OBD2, Carista OBD2, JScan, OBD Auto Docoe, LeafSpy, Dr. Prius, TrackAddict, Harry's Lap Timer, inCar Doc, etc.

Tips: Many apps may be added to the compatibility list.

Perfectly compatible with BimmerCode

Vgate Vlinker BM+ Vehicle Coverage

Support Protocols

These Protocols Cover Almost 99% of the OBDII Cars on the market

Rich Instruction Set, Compatible with more APP Software：

-- Fully compatible with ELM's AT command set;

-- Fully compatible with STN's ST command set;

--39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.

-- Compatible with ELM and STN power management solutions.

-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;

-- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.

-- Device sleep power consumption is less than 2 mA.

-- OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.

-- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.

-- 256-byte storage unit

-- More than 100,000 erasable times

-- Read and write operations on any unit in the storage area by using the VT command

-- Mix ID Sending" mode of CAN protocol.

-- Optional formatted send data according to protocol

-- Multiple WM sequence settings

-- Support AT command to manually set WM sequence

-- Support for specifying a protocol or a full protocol-wide temporary WM sequence

-- Support for a permanent link between a protocol and a private WM sequence

-- Secure bootloader for easy firmware updates

Easy To Use

1. Software installation
2. OBD Device Access
3. Use the Software
4. Connect the Phone

How to connect Vliner BM+ well with the software to use ?

For Android Phone :

Step 1: lnsert the adapter into the OBD interface of the car, Turn ignition to Key On Engine Off Position. Open the Bluetooth settings. Search forthe device name "vLinker BM-Android" and click Pair.

Step 2: Enter the pairing code: 1234 lf the pairing is successful, you can open the APP to set up the connection.

Note: Please select the BluetoothDevice Name "vLinker BM-Android"(Searching for Bluetooth may takesome time.)

Step 3: open the app's Settings .

Step 4: Select Adapter "vLinker Bluetooth"

Spte 5: Return to the main page of the app, click CONNECT.

For IOS system :

Step 1: Insert the adapter into the OBD interface of the car. Turn ignition to Key On Engine Off Position. -button on the ios device and continue to the OBD app setting.

Note: Cannot see Eluetoothaename in iPhone?

Dont worry.This Device only reauire toeoaure Bluetth device name in the OBD app Settina. lustenable Bluetooth button on the los Device and continue to the obd app setting in step 2 ONLY ios supported Bluetooth profilas can show device name.

Bluetooth LE 4.0 technology isnitapply for the supported.

Step 2: open BimmerCode APP, Click Setting, Enter the Setting Menu Page.

Step 3: click Adapter.

Step 4: Select Adapter For "vLinker Bluetooth” , then click on the upper left corner return.

Step 5: Click"Done" back to the main page of the APP.

Step 6: Enter the main page click Connect

Step 7: Choose your vehicle model (eg: BMWw 7 Series...)

Step 8: wait for BimmerCode APP to communicate with the car.

Step 9: lf the communication is successful, you can select the control unit you want.. .

Vgate vLinker BM+ Packing List :

1 x Vgate vLinker BT3.0 or Vgate vLinker BT4.0
1 x User manual