24V to 12V Heavy Duty Truck Adapter for X431 easydiag/ Golo/ / IDIAG/ ThinkCar/ ICarScan/ Diagun/ GOLO/ DBScar II

Godiag GT106 24V to 12V Heavy Duty Truck Adapter for X431 easydiag/ Golo/ M-DIAG/ IDIAG/ ThinkCar/ ICarScan/ Diagun/ GOLO/ DBScar II

Godiag GT106 heavy truck power module converter can convert heavy truck diagnostic interface from 24v to 12v, used for X431 easydiag 3.0, easydiag 2.0, Golo Carcare 3, ICARSCAN golo technician box, ThinkCar diagnostic Bluetooth head for truck diagnosis.

It helps to convert the truck 24v K-Line communication protocol to 12v K-Line, so that the launch vehicle equipment can be used, and the launch 12v diagnostic head will not be burned.

Product Function:

1. Convert the 24v voltage of the diagnostic interface of heavy trucks, light trucks, pickups, etc. into 12v voltage that can be used by diagnostic equipment.

2. Convert The 24v truck k-line communication protocol into the 12v k-line communication protocol.

3. When inputting 24v voltage, the screen will display the input voltage is 24v, and the switch button pops up.

4. When outputting 12v voltage, the screen will display the output voltage is 24v, and the switch button is pressed down.

5. The communication protocol indicator light shows that when the device is communicating, and it can display the communication status.

Works with the following scanners:

EasyDiag, EasyDiag 3.0, Golo Green Adition, M-DIAG, IDIAG, ICarScan, Diagun, GOLO, DBScar II

Notice:

We only Provide GT106 12V to 24V adapter, You need to get diagnostic software for trucks and other heavy duty vehicles.

Godiag GT106 Features:

1. Our voltage is 12.5v, which is to simulate the real voltage after starting the vehicle. The similar products are 12v, but the normal car is about 12.5v after starting.

2. Let the diagnostic software better recognize the ignition voltage of the vehicle. Because some car models have requirements for the ignition voltage, and when the 12v decays a little to about 11v, some software with stricter requirements will alarm or stop the diagnosis.

Supported Trucks or Heavy Duty Vehicles

ABS (HD), For ALLISON (HD), For BENDIX ABS (HD), For BONLUCK (HD), For BOSCH (HD), For CATERPILLAR (HD), For CHAOCHAI (HD), For CHRYSLER (DIESEL) CITROEN (DIESEL), For CTRUCKTY (HD), For CTRUCKZY (HD), For CUMMINS (HD), For DACHAI (HD), For DAF (HD), For DAYUN (HD), For DEMO (HD), For DETROIT (HD), For DFL (HD), For DongFeng (HD), For EATON (HD), For FAW (HD), For FIAT (DIESEL), For FORD (DIESEL), For FOTONAUMAN (HD), For FREIGHTLINER (HD), For GM (DIESEL), For Great WalI (DIESEL), For HALDEX ABS (HD), For HIGER (HD), For HINO (HD), For HONGYAN (HD), For HUANGHAI (HD), For HYUNDAI (HD), For INTERNATIONAL (HD), For ISUZU (HD), For IVECO (HD), For JAC (DIESEL), For JAC (HD), For JAC LIGHT (HD), For JMC (HD), For KAMA (HD), For KARRY (HD), For KARRY TRUCK (HD), For KENWORTH (HD), For KINGLONG (HD), For KOBELCO (HD), For LAIDONG (HD), For MACK (HD), For MAN (HD), For MAXUS (DIESEL), For MAXXFORCE (HD), For MAZDA (DIESEL), For MERCEDES (HD), For MITSUBISHI (DIESEL), For MITSUBISHI FUSO (HD), For NISSAN (DIESEL), For OBD (HD), For OPEL (DIESEL), For PACCAR (HD), For PETERBILT (HD), For PEUGEOT (DIESEL), For QUANCHAI (HD), For RENAULT (HD), For SCANIA (HD), For SCR (HD), For SHACMAN (HD), For SHANGCHAI (HD), For SINOTRUK (HD), For SPRINTER (DIESEL), For STERLING (HD), For SUNWIN (HD), For TOYOTA (DIESEL), For UD (HD), For VOLVO (HD), For VW (DIESEL), For WABCO ABS (HD), For WAW (HD), For WEICHAI (HD), For WESTERN STAR (HD), For WUZHOULONG (HD), ForXICHAI (HD), For YANGCHAI (HD), For YQSH (HD), For YUCHAI (HD), For YUNNEI (HD), For YUTONG (HD), For ZHONGTONG (HD)

Godiag GT106 Structure Overview:

Functions:

1. Convert the truck diagnostic interface 24V into 12.5V:

Convert the 24V power of the truck diagnostic interface into DC12.5V and supply it to the 12V diagnostic equipment with truck diagnostic software, For so as to protect the 12V diagnostic equipment. 12.5V is to simulate the voltage after the vehicle is started, For which can ensure that the 12V diagnostic equipment software can normally recognize the voltage after the vehicle is started. 【Some diagnostic software will alarm or stop the diagnosis if it recognizes that the starting voltage of the vehicle is lower than normal.】

2. Convert 24V truck K-Line signal to 12V K-Line signal:

The 12V diagnostic equipment 7PIN K-Line communication will be burned by the 24V K-line signal of the truck without step-down conversion. GODIAG GT106 24V TO 12V OBD2 Scanner For Heavy Duty Truck Adapter can convert the truck's 24V K-line voltage signal into 12V K-line signal in order to protect the 12V diagnostic equipment 7PIN K-Line communication from being burned by 24V.

1. Communication indication function:

When J1939 CANH (PIN12), For CANH/J1939 (PIN6), For J1708 K-line (PIN7) has signal communication such as diagnostic programming, For the corresponding indicator light will light up or flash. It can display the current status of communication between the diagnostic equipment and the vehicle.

If you do not connect the car and only connect the diagnostic equipment for software communication signal test, For you can judge whether the communication of the diagnostic equipment is normal.

2. Input voltage display function:

The display voltage function displays the currently connected vehicle OBD2 diagnostic interface voltage of 24V when the function switch button is popped up. It can be used to monitor the current vehicle diagnostic interface voltage. If the voltage is found to be abnormal, For the operation of the vehicle can be stopped.

3. Output voltage display function:

When the function switch button is pressed down, For the voltage display shows that the voltage of the OBD2 diagnostic output interface after the current conversion is 12.5V. It can be used for equipment self-test before use to ensure that the conversion voltage is normal, For which can better protect the 12V diagnostic equipment.

4. DC power interface input function

The DC power input port can be connected to the vehicle power supply, For and can also be connected to the power supply in the office. The power supply must be higher than 13V to output normal 12.5V.

Package Includes:

1pc x Godiag GT106 24V-12V Heavy Duty Truck Diesel Adapter