JDiag P100 Automotive Power Circuit Probe Kit Circuit Tester Car Volta

The best cheap Automotive power probe

Name: The best cheap Automotive power probe
Brand: CXZAG | Automobiles & Motorcycles with free worldwide shipping
SKU: 1005005880521806
Price: 79 USD
Availability: InStock

79.00USD

Tax excluded Delivered within 7-15 days

Automotive Power Circuit Probe Kit Circuit Tester Car Voltage Detector Electrical System 12V 24V Car Diagnostic Tool

Quick Login

Secure

Stripe is known for its strong security measures. It uses encryption, tokenization

Free Shipping

FREE SHIPPING WORLDWIDE

Fast Shipping

We will try to deliver the product to you as soon as possible, just give us 1 or 2 weeks

JDiag P100 New Generation Automotive Electrical Circuit System Tester for Cars and Trucks 0V - 70V

General description tool is the best electrical tester, reducing diagnostic time in all 6-30V at vehicle electrical systems after a simple hook-up of the tool to the vehicles's battery, you can:

1. Determine at a glance if a circuit is positive, negative or open without having to reconnect clips from one battery pole to another.

2. Test for continuity with its built -in auxiliary ground lead.

3. By depressing the own switch of tester electric, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.

4. Test for poor ground contacts of this circuit tracer instantly without performing voltage drop tests, the tool is also short-circuit protected its internal circuit break will trip if it becomes over loaded.

About P100 Automotive Circuit Tester:

Red/Green Polarity Indicator (Positive/negative and tests in different modes will show red/green indicator lights).

LCD HD Color Display (Adopt LCD color screen, the screen is clearer and the data is more intuitive).

Multi Languages Support : English, German, French, Spanish, Italian, Russian, Portuguese.

1. Voltage & Polarity Testing-Determine DC/AC Voltage and Postive/Negative quickly.

2. Resistance Continuity Testing- LCD Screen display the value of resistance.

3. AC Circuit Singal Testing- Fast to trubleshoot the sensors circuit problem.

4. Components Activation in your hand, in the vehicle or W/Ground.

5. Testing Trailer Lights and Connections-10M extension cable allow your to test Cars or Trucks.

6. Checking for Bad Ground Contacts and Locating Short Circuits.

What are the advantages of the product？

Purpose of the P100 Power Circuit Probe Kit :

* Diagnose battery Status

* AC/DC voltage, resistance, diode test

* Componet activation

* Find short circuit

* Find the broke wire

* Find the bad ground

* Testing trailer lights

* Check continuity

* 20Ft extension cable

Specifications:

1. Display: TFT color display (160 x 128 dpi)

2. Operating Temperature: 0 to 60°C (32 to 140 F°)

3. Storage Temperature: -40 to 70°C (-40 to 185 F°)

4. External Power: 12.0 or 24.0V power provided via vehicle battery

5. Dimensions: Length 165 mm * Width 40 mm * Height 27 mm

Test Tool Specifications:

DC voltage range : 0-65V +1 digit

Resistance range : 0-200 K ohm

Frequency response of tone pass through

0Hz to 10K hz.

Circuit Breaker

Rating current: 1-10 Amp

Testing Standard:

100% current : no trip

150% current : trip in one hour

200% current : trip in 3-30 seconds.

300% current : trip in 0.5-4.0 seconds.

1. Probe tip of electric tester-
contents the circuits or component to be tested

2. Head lights-
illuminate dark work areas or work areas at night

3. Red/green polarity indicator-
identifies positive, negative or open circuits the red indicator lights when the probe tip is contacting a positive circuit the green indicator lights when the probe tip is contacting a negative circuit

4. LED display-
indicates test results

5. Power switch-
allows you to conduct a positive or negative battery current to the tip for activating and testing the function of electrical components

6. Mode button-
selects the work mode: AC voltage, DC voltage, resistance, Diode

7. Speaker-
when the audio tone is turn on a beep will be heard

8. Auxiliary ground lead-
assist test as a ground lead

9. Adapter-
connects to the battery

There are four modes to diagnose the circuit tester, which can be accessed by depressing the mode button and cycling through each one.

DC voltage: Contact the probe tip to a circuit then the LCD display will read the dc voltage with a resolution of 0.1 volt

AC voltage: Contact the probe tip to a circuit then the LCD display will read the max. voltage, the min voltage, frequency and duty cycle

Resistance: Contact the probe tip to a circuit then the LCD display will read the resistance between the tip and auxiliary ground lead

Tone on/off: Just do a quick press of the mode button to toggle the tone on or off while quickly press(a quick press and release)the mode button, if a short high been is heard this means the audio tone is turned on, if a short low beep is heard, the audio toned off

Safety precautions and warnings prevention personal injury or damage to vehicles and /or the scan tool,read this manual first care fully and observe the the following safety precautions at a minimum whenever working on a vehicle.

1. Always perform automotive testing in a safe environment.

2. Do not attempt to operate or observe the tool while driving a vehicle operating or observing tool will cause driver distraction and could cause a fatal accident.

3. Keep clothing, hair, hands, tools test equipment etc away from all moving or hot engine parts.

4. Operate the vehicle in a well-ventilated work area, exhaust gases are poisonous.

5. Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.

6. Use extreme caution when working around the incognito coil distributor, cap ignition wires and spark plugs these components create hazardous voltages when the engine is running.

7. Put the transmission in p(for A/T)or N(M/T)and make sure the parking brake is engaged.

8. Don't connect or disconnect any test equipment while the ignition is ON or the engine is running.

9. Keep the tool dry, clean free from oil/water or grease.use a mild detergent on a clean cloth to clean the outside of the scan tool when necessary.

Reference 1005005880521806

In stock 21 Items

Data sheet

Brand Name: JDiag
Origin: Mainland China
Certification: CE
Hign-concerned Chemical: None
Electronic: No
Material Type: ABS
Item Weight: 1.2kgkg
Item Height: 3.9inchinch
Item Width: 7.1inchinch
Item Length: 10.6inchinch
External Testing Certification: ce
Voltage: 12v circuit tester
Support wide input voltage range from 9V to 70V
Power: 12V
Model Name: P100
Software Version: 2024 NEWEST
Hardware Version: 2024 NEWEST
Item Type: Electrical Testers & Test Leads
Display: TFT color display (160 x 128 dpi)
DC voltage range: 0-65V +1 digit
Resistance range: 0-200 K ohm
Automotive tester: Automotive tester
automotive tester cable
style: circuit tester
product name: automotive circuit tester
power probe: power probe circuit tester
circuit system detection: electrical circuit tester
suit for: circuit tester automotive
ac: circuit tester ac
Detection current type: auto circuit tester
circuit tester style: ac circuit tester
electrical tester: electrical circuit tester
12v: circuit tester 12v
product: circuit tester kit
suit: circuit tester car
ac circuit tester: circuit tester ac
auto tester: circuit tester auto
dc circuit tester: circuit tester dc
digital display: circuit tester digital
purpose: circuit tester for car
probe: circuit tester power probe
car diagnostic: circuit tester tool
diagnostic tool style: car diagnostic diagnostic

No customer reviews for the moment.

JCD 800W SMD Soldering...

Catalog

170.99USD -58% 71.82USD

8206 KIT6
8206 KIT1
8206 KIT2
8206 KIT3
8206 KIT4
8206 KIT5

JCD 800W SMD Soldering Station Quick Heat 3 in 1 Heat Gun USB Interface LED Display Solder Iron BGA Rework Welding Station 8206

-20%
New

The best cheap Automotive power probe

Related Products ( 16 other products in the same category )

5 /5

Product Reviews