2/4pcs 180 360 MG995 Arduino Metal Gear Servo Motor Servomotor Torque DIY RC Car Robot Helicopter Model Remote Control Aircraft

 If need Digital Servo, Click the photo below to buy

Note:
1. Servo all metal means spindle and gearwheel all is iron made; Half metal means spindle is metal, gearwheel is plastic
2. 360 Degree Servo rotates continuously. If need to control the angle, plesae choose the option 180 Degree Servo
3. For 180 degree servo, some controllers can not control the angle accurately; please use a professional PWM Servo Controller to control the angle, as shown in the video: https://youtu.be/zv6vd7eud_o

YIDI 2/4pcs 180 360 MG995 Arduino Metal Gear Servo Motor High Speed Torque DIY RC Car Robot Helicopter Model Remote Control Aircraft

Features:
Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc...
Great for truck, Boat, Racing Car, Helicopter and Airplane.
Power Supply: Through External Adapter.
Connector Wire Length 300mm

Specification:
Product Model: MG995
Color: Black
Dimension: 40mm x 19mm x 43mm
Rotation Angle: 0-180°/360°(Continuous Rotation)
Operating Speed: 0.20sec/60 degrees (4.8V no load)
Operating Speed: 0.17sec/60 degrees (6.0V no load)
Stall Torque: 9kg/cm (4.8V)
Stall Torque: 11kg/cm (6V)
Operation Voltage: 4.8 - 7.2Volts
Operating Temperature: 0 ℃- 55 ℃
Gear Material: Half Metal/All Metal
Dead Band Width: 5msec
Operating Mode: Analog
Plug Type: JR, FUTABA General
Accessories: Multi-arm, Fixing screws(AS the picture shows)
Connector Wire: 300mm(Brown: Negative; Red: Positive; Orange: Pulse Input)

Steering Gear Control:
The control of the steering gear generally requires a time base pulse of about 20ms, and the high level part of the pulse is generally the angle control pulse part in the range of 0.5ms~2.5ms.

1. Servo 0-180 Degree
The corresponding control relationship is as follows:
0.5ms---------------0 degrees;
1.0ms--------------45 degrees;
1.5ms--------------90 degrees;
2.0ms--------------135 degrees;
2.5ms--------------180 degrees

For 180 degree servo, please use a professional PWM Servo Controller to control the angle

2. Servo 360 Degree 
The steering gear is actually equivalent to a geared motor with infinitely variable speed, which can control the speed and direction of the rotation. There is no 0-360 degree angle control function.

Packing: 2 x MG995 Servo or 4 x MG995 Servo for option(Including Accessories)